Koncar HC1A 60 330.SF, User Manual

Page: 15 / 64

EN - 13 -
If there is noise;
The cooling gas which circulates in the refrigerator circuit may make a slight noise (bubbling
sound) even when the compressor is not running. Do not worry this is quite normal. If
these sounds are different check that;
• The appliance is well levelled
• Nothing is touching the rear.
• The stuffs on the appliance are vibrating.
If there is water in the lower part of the refrigerator,
Check that;
• The drain hole for defrost water is not clogged (Use defrost drain plug to clean the
drain hole)
Recommendations
• If the appliance is not used for long time (for example during the summer holidays)
unplug and clean the appliance and leave the door open to prevent the formation of
mildew and smell.
• To stop the appliance completely, unplug from main socket (for cleaning and when
the doors are left open)
• If there is still a problem with your refrigerator although you have followed the instruc-
tions in this book, please consult your nearest authorized service center.
Tips for saving energy
1- Install the appliance in a cool, well ventilated room , but not in direct sunlight and
not near heat source (radiator, cooker.. etc. ). Otherwise use an insulating plate.
2- Allow warm food and drinks to cool down outside the appliance.
3- W hen thawing frozen food, place it in the refrigerator compartment. The low
temperature of the frozen food will help to cool the refrigerator compartment
when it is thawing. So it reduces the energy requirements.
4- W hen placing, drinks and liquids they must be covered. Otherwise humidity
increases at the appliance. Therefore the working time gets longer. Also covering
drinks and liquids helps preserve the smell and taste.
5- W hen placing food and drinks, open the appliance door as briefly as possible.
6- Keep the covers closed of any different temperature compartment in the appli-
ance (crisper, chiller ...etc. ).
7- Door gasket must be clean and pliable. Replace gaskets if worn.
Conformity Information
• This appliance is designed for use at an ambient temperature within the 16°C - 32°C
range.
• The applianc e is designed in c omplianc e with the EN62552, IEC60335-1 /
IEC60335-2-24, 2004/108/EC standards.