KPM-35 Optical Power Meter User Manual
Product features
9
SC
FC
ST
LC(
Optional
）
Product parameter
10
Wavelength range 850nm~1625nm
Manual calibration
Silica gel shell protection design, 2m anti-fall
±0.2 dB accuracy
Measuring range:
-70～+10dBm/-50~ +26dBm
Waterproof keys suitable for various outdoor
environments
Equipped with LED lights to facilitate work
in dark environments
Wavelength（nm）
Measuring range
（dBm）
Connectors
Power Supply
Resolution
（dB）
Working Temperature
Dimensions/Weight
850/980/1300/1310/1490/1550/1625nm
-70～+10dBm/-50~ +26dBm
2.5mm universal inSC
Alkaline battery(3 AA 1.5V
battery)
0.01
-10~+60(℃）
Storage Temperature
-25~+70(℃）
Product introduction
8
Key
Function
REF/dB
Increase by 0.1dB
Shut down
λ
Decrease by 0.1dB
Save
Calibration function description
6
Common fault solutions
7
Fault prompt
Possible Causes
Solutions
LCD display is weak
Battery low
Replace battery
Reboot or replace battery
Unable to boot display
Battery low or
other reasons
Optical power
value is abnormal
Connector failure/dirty
Reconnect the connector
or clean the sensor
Press the LED+REF/dB keys at the same time to enter the
calibration mode. Cal is displayed at the bottom of the screen. The
following operations are only valid in the calibration mode. 入 key
for downward adjustment, REF/dB key for upward adjustment. After
adjustment, press LED to save.
Tips
11
Operating environment altitude:
Area altitude below 2000m
Please read all instructions and warnings before
using this product. Irregular use will cause
damage to the product or personal safety.
Use environment
Packing carton, optical power meter ,
certificate of conformity, instruction manual.
Standard configuration
Contact us:
KOMSHINE TECHNOLOGIES LIMITED
Tel : +86 25 66047688
Email : info@
k
omshine.com
Add: 2F Bldg. D Qinheng Tech. Pk. Nanjing，
JS, 210001, China.
Website ：www.KomShine.com
2.5mm universal inSC
KPM-35 optical power meter is widely used in the
construction, maintenance, inspection and acceptance of optical
fiber communication network projects. The combination of fiber
optic power meter & light source, check continuity, and help
evaluate the transmission quality of optical fiber links. Smart
appearance, sustainable backlit display, and friendly operation
interface make you feel good about it. Provides 7 wavelengths
detection, with automatic wavelength memory function. The
ultra-wide optical power test range, precise test accuracy and
new user self-calibration function will make your work even
better. Universal interface design, support FC/SC/ST and other
interfaces, without complicated conversion. In addition, the LED
lighting function has been added to the product basis to allow it
to be carried out in a dark environment, further improving work
efficiency.
1) Do not store this product in high temperature, strong light
and strong magnetic fields, and do not place it in other harsh
environments such as fire sources.
2）Improper use of the product may easily cause the product
damage or may endanger personal and property safety.
3) If consumers violate the product manual and improperly
use it, the personal and property damage caused by it will
bearby yourselve, our company will not bear any legal
responsibility.
4) Non-professionals are strictly prohibited from
disassembling this product.
5) Avoid using electrical appliances or loads that exceed the
output current of this product (the circuit will be protected
and there will be no output).
6) Avoid strong physical effects, including knocking, throwing,
trampling, squeezing, etc.
86x46x181mm / 364g
