- 2 -
BATTERY CHARGER
KH 968
Intended Use
The Battery Charger is intended exclusively for:
• for the charging of rechargeable Ni-Cd and
Ni-MH batteries of the sizes AAA / AA / C / D
and 9 V Block with standard commercial design
capacity.
• for charging both fast and standard
rechargeable batteries.
• domestic use only, it is not intended for
commercial use.
Items supplied
• Battery Charger KH 968
• Operating manual
Description of the appliance
q
Charging slots for 9 V Block batteries
(Charging slots 5 and 6; see fold-out side)
w
Charging slots for AAA / AA / C / D batteries
(Charging slots 1 to 4; see fold-out side)
e
LEDs
Technical data
Input Voltage:
AC 100 - 240 V ~
60/50 Hz
Power consumption :
130 mA
Protection class:
II /
Operating temperature:
0 ° C - 25 ° C
Storage temperature:
-20 ° C - 50 ° C
Output:
max. 3.34 VA
Output voltages:
4 x 1.4 V
(Charging slots 1-4)
2 x 9 V
(Charging slots 5-6)
Charging currents:
1000 mA (with 1-2 batteries)
500 mA (with 3-4 batteries)
2 x 30 mA (at 9 V battery)
Safety instructions
Fire hazard!
Do not place the Battery Charger:
• where it would be subject to direct sunlight.
It could happen that the Battery Charger over-
heats and becomes irreparably damaged.
• in close adjacency to sources of heat. This inclu-
des for example ovens, fan heaters and similar
appliances, as well as the ventilation openings
of electrical devices. The Battery Charger could
be irreparably damaged.
• in damp environments or in the vicinity of water.
Moisture could permeate into the Battery Charger.
There would then be the danger of receiving an
electric shock and or causing a fire!
• Only charge rechargable batteries of the types
„Ni-Cd“ and „Ni-MH“. NEVER recharge batteries
of other types or non-rechargable batteries.
These are not suitable for recharging. Batteries
not suitable for recharging can overheat and
explode. It could irreparably damage the
Battery Charger and the inserted batteries.
There is also a risk of personal injury!
IB_KH968_RP38017_LB6 17.11.2009 10:00 Uhr Seite 2
