Kompernass POWERFIX KH 4008, Operating Instructions Manual, Page: 6 / 38

- 4 -
Adjustment
• Bring the levelling plate i into a horizontal
position by turning the adjustment screws u and
use of the adjustment spirit level t .
Notice:
The water bubble of the spirit level t must be
located between the two markings.
• Place the Laser Spirit Level in the mounting base
j and fix it firmly with the securing clamp k . If
need be, correct the adjustment.
• Loosen the securing screw 2! , then swivel the
levelling plate i complete with the Laser Spirit
Level through 90° y , by means of the 360°
angle scale.
• Readjust the horizontal by turning the adjustment
screws u and with use of the adjustment spirit
level t . A readjustment may be necessary after
the return swivel.
Notice:
The water bubble of the spirit level w must also be
located between the two markings.
• On the competion of successful adjustment, the
laser beam is always at the same height when
the Laser Spirit Level is swivelled by means of the
360° angle scale
y .
• Height adjustment is accomplished by turning the
crank o on the tripod.
Operation
Caution!
This appliance contains a Class 2 laser.
NEVER direct the laser beam at people or
animals. NEVER look directly into the laser. The la-
ser can cause serious eye damage.
Normal operation (Fig. 1)
This measuring method is suitable for indicating
measuring points.
• Switch on the laser of the beforehand adjusted
Laser Spirit Level by turning the ON/OFF switch
.
• Using the point laser, mark the distant measuring
point. With the 360° rotatable levelling plate i
an all-round marking is possible at the same
time.
90° Angle option (Fig. 2)
This measuring method is suitable for the marking
of vertical lines.
• Insert the laser 90° deflection attachment
;
into the laser optic r of the beforehand
adjusted Laser Spirit Level.
• The exactly by 90° deflected point laser produ-
ces a vertical reference level to the laser beam.
Line projection (Fig. 3)
This measuring method is especially helpful with for
example the hanging of pictures.
• Insert the laser line attachment
2) into the laser
optic r of the beforehand adjusted Laser Spirit
Level.
• A line is then projected on to the wall, with
which previously
determined point-markings can be connected.
Caution:
Due to a broader spread there is a reduction in the
brightness of the laser beam.
IB_KH4008_BN25974_LB3 12.02.2009 11:08 Uhr Seite 4