- 4 -
KH 4157/4158
• To reduce the dangers of fire and life-
threatening risks of electrocution, en-
sure that the design neon tube never
becomes wet!
• Never operate the Design Neon Tube
whilst it is in its packaging – risk of fire.
• The illuminating element in this Design
Neon Tube cannot be exchanged.
• The outer cable of this design neon
tube cannot be replaced. Should the
power cable be damaged, the Design
Neon Tube must be disposed of.
Operation
• Before installation, ensure that the
Design Neon Tubes and the cable are
in a visibly faultfree condition.
• Assemble the Design Neon Tubes on
a stable footing using only the acces-
sories supplied.
• Insert the euro plug into the socket -
the Design Neon Tube is now ready
for use.
• You can use the cable switch to turn
the Design Neon Tubes on and off.
• Do NOT operate the Design Neon
Tubes if they are visibly damaged.
Before operating the lamps again,
have them repaired by a trained
technician.
Cleaning and Care
• ALWAYS remove the plug from the
socket when cleaning the Design
Neon Tube.
• Wipe the design neon tube with a
soft, dry piece of cloth. Do not use
aggressive cleaning agents.
• Protect the design neon tube from ex-
treme soiling, extreme temperatures
and humidity.
Disposal
Do not dispose of the appliance
in your normal domestic waste.
Dispose of the appliance through an
approved disposal centre or at your
community waste facility.
Observe the currently applicable regula-
tions. In case of doubt, please contact
your waste disposal centre.
Dispose of the packaging materials
in an environmentally responsible
manner.
IB_KH4157_58_KOE3057_EN.qxd 28.08.2007 8:45 Uhr Seite 4
