92
CR 5 A1
GB
If you now press the MENU button
in video standby, the following menu opens:
Motion detection
Using the ▲▼ buttons
/
you can move the selection bar to the desired entry
and then call up this menu item with the
/ button
. To exit the activated
menu item without making a change, press the MODE button
. Below right, the
current menu board as well as the total number of menu boards is shown. If the
lowest menu item on a menu board is selected which leads to a further menu
board, press the ▼ button
to jump to the fi rst entry on the following menu
board. To close the menu, press the MENU button
.
Resolution
If you access this menu option, you can then set the the video resolution:
"1920 x 1080P (HD)", "1280 x 720P" and "640 x 480P" are the options avail-
able. Use the ▲▼ buttons
/
to select the desired resolution and confi rm
your selection with the
/ button
to return to the list of menu items.
Exposure
If you access this menu option, you can then adjust the video exposure in three
steps upwards (from +1 to +3, brighter), or downwards (from –1 to –3, darker).
When the setting is set to "0" there is no exposure compensation. Use the ▲▼
buttons
/
to select the desired video exposure compensation and confi rm
your selection with the
/ button
to return to the list of menu items.
Video length
If you access this menu option, you can then set the length of the loop for the
video recording: "3 Min", "5 Min", "10 Min" or "Loop recording off " are the
available options. Use the ▲▼ buttons
/
to select the desired value for the
loop recording and confi rm your selection with the
/ button
to return to
the list of menu items.
Remember that the microSD card used must have a suffi cient capacity to record
the desired length of loop in the video resolution set. If you select "Loop record-
ing off " the recording ends when you reach the capacity of the microSD card.
When the end of the recording is reached, the device will start a new recording
with the length set.
If the capacity of the memory card is not suffi cient for the set duration, the record-
ing will be aborted. Reduce the length of the loop recording or use a memory
card with a greater capacity.
IB_47583_CR5A1_LB1.indb 92
23.04.14 16:46
