P
a
r
t
s
L
i
/
D
g
m
No. Qty.
Description
1
2
Roof Rack Half
Mending Plate w/logo
3
4
1¾" U-bolt w/Nylock Nut
8
6mmX35mm Hex Bolt
5
10 6mm Nylock Nut
6
6mmX41mm Hex Bolt
7
Mounting Brackets
Adhesive Foam Strips
Page 1: ...of Rack Carrier We build the carrier to be durable for years of trouble free use We provide you with innovative design features which allows the carrier to be used universally for most UTV s with a roll cage With proper installation and maintenance your Cab Rack will be a reliable tool providing greater use and will increase the value of your UTV UTVRR TM ...
Page 2: ...her means to make sure items can not fly out Caution should be taken if bungee s or rubber straps are used to hold item in carrier as these may allow for item to bounce and can cause injury if strap disengages or snaps Do not place items in carrier which exceed 50 lbs or cause an unbalanced load Load to be equally distributed over carrier Do not make high speed maneuvers which may increase the ris...
Page 3: ... t s L i s t D i a g r a m No Qty Description 1 2 Roof Rack Half 2 2 Mending Plate w logo 3 4 1 U bolt w Nylock Nut 4 8 6mmX35mm Hex Bolt 5 10 6mm Nylock Nut 6 2 6mmX41mm Hex Bolt 2 7 4 Mounting Brackets 7 7 7 7 8 8 4 Adhesive Foam Strips ...
Page 4: ...erly secure using tie downs or additional fastening method Note make sure screws are tightened before using carrier 3 K O M O D O A T V A c c e s s o r i e s 1311 John Reed Ct City of Industry CA 91745 USA 1 800 333 8889 For parts or warranty issues contact Set Roof Rack Halves 1 on a flat surface Using 4ea Screw 4 and 4ea Nylok Nut 5 line up holes of Mending Plate 2 with holes in the ends of the ...
