3
Operation
Preparing
Before use, make sure that the pressure in the waste holding tank is equalised by opening and
closing the slide valve with the seat cover closed.
1.
Separate tanks. (fig. 1)
2.
Remove pour-out spout cap while it is pointing upward and then add appropriate
deodorant (fig.2). Replace cap and tighten securely.
3.
Combine the tanks and close the slide valve. (fig.3)
4.
Remove the cap of the freshwater tank and fill it up with appropriate amount of fresh
water. Screw the cap again on the freshwater tank. (fig.4)
Never add deodorant to the freshwater tank.
Flushing
1.
Pull out the slide valve to allow the waste to pass into the waste holding tank. (fig.5)
2.
Press the pump to flush the portable toilet. (fig.6)
3.
Close the slide valve.
Separate the tanks
Add deodorant to the waste
holding tank
Combine the tanks
Add fresh water to the
freshwater tank
Open the slide valve to use
Press the pump to flush
the tank
Emptying the Waste Holding Tank
1.
Do not overfill the tank. Open valve to check visually.
2.
Be sure valve handle is closed. Separate tanks.
3.
Carry the waste holding tank to a permanent toilet to empty.
4.
Remove pour-out spout cap while it is pointing upward.
5.
If there is a water supply, flush out the waste holding tank.
Never empty the waste holding tank directly into the environment.
