Inflation
1.
Unscrew the valve cap, ensure the valve pin to
open the valve, Let the air flow naturally into
the product. Press the valve pin so it in the
“UP” position.
2.
Ensure the pump hose is connected to the
“inflate” outlet on the pump.
3.
Connect the pump nozzle into the valve, with
a half twist (clockwise)
4.
Open the tap on the pump and start pumping
air into the board by sliding the pump piston
up and down. Inflate until you reach the
required pressure.
o
Minimum 12psi
o
Maximum 15psi
5.
After inflation, tighten the valve cap. Only the
valve cap can ensure proper air tightness.
