Komfovent Verso Pro 2 Series, Installation Manual

Page: 6 / 44

6
UAB KOMFOVENT we reserve the right to make changes without prior notice
VERSO PRO2_2_20-02
EN
1.3. Unit Components and Sections
VERSO PRO2 air handling units are assembled from separate sections. Depending on the order and unit size, sections
may be pre-assembled in a factory or transported separately. Type of each section is marked with a label attached to the
section door. The following are the main sections of the air handling unit. For equipment and number of sections in each
unit see the technical data print-out of the specific unit.
1.3.1. Filter-Fan Section
VERSO R and VERSO CF air handling units have two filter-fan sections. In VERSO S air handling units filters and fans are
installed in separate sections. Filter contamination is measured and fan is controlled by an electronic circuit board fitted in
the same section.
1
2
3
3.
2.
1.
4. 5.
Fig. 1. Filter-fan section
1 – fan assembly with an installation frame 2 – fan control board (C5_VM),
3 – bag filters, 4 – fan section label, 5 – filter section label