Network module manual
- 9 -
5.
For changing network addresses first there is a need to erase current addresses located in
“Static Configuration” column. Then, in „Static Configuration“ column, in IP cell should
be written a new IP address (213.226.94.133), in “Gate“ cell – new gateway address
(213.226.94.1), in “Subnet“ cell – subnet mask address (255.255.255.0). To save a new
addresses first must be pressed „Write“(7), and then „Set Static Configuration“(8) button:
6.
Restart connection (9) and by pressing “Read” button (10) a new network addresses will
be shown in “Static Configuration“ and “Current Configuration“ columns:
7
8
10
9
Summary of Contents for ping
Page 1: ...Installation Manual ...
