EN
UAB AMALVA we reserve the right to make changes without prior notice.
30
1. TRANSPORTATION
The air handling units are ready for transit and storage (1 Picture). The unit is packed to prevent damage of the
external and internal parts of the unit, dust and moisture penetration.
Corners of the air handling units are protected against the damage – protective corners are used. The entire
unit is wrapped up in protective film. For transit or storage, units are mounted on timber pallets. The unit is fas
-
tened to the pallet with polypropylene packing tape over protective corners
Vertical and horizontal units ready for transit and storage
1 Picture
When unit is loaded or unloaded by crane, cargo rope is fastened in its designated places.
Forklift truck or hand pallet truck can transport air handling unit as it is shown (1 a, b, c Pictures).
Vertical and horizontal unit transportation by forklift truck, hand pallet truck or crane
The unit should be examined upon receipt, to ensure that no visible damage has occurred during transit, and the
advice note checked to ensure that all items have been received. If damage or delivery shortages are disco vered,
the carrier should be immediately informed. AMALVA should be notified within three days of receipt, with a written
confirmation sent within seven days. AMALVA can accept no responsibility for damage by unloading from carrier
or for subsequent damage on site.
If the unit is not to be installed immediately, it should be stored in a clean, dry area. If stored externally, it should
be adequately protected from the weather.
1 c Picture
1 b Picture
1 a Picture
1 a Unit is transported by forklift truck on a wooden pallet;
1 b Unit is transported by hand pallet truck on a wooden pallet;
1 c Unit is lifted by crane on a wooden pallet.
