4
Installation Manual
1.3. Kitchen Hood Connection
Air handling units KOMFOVENT DOMEKT REGO 200VE have possibility of kitchen hood connection (in the
functional diagram it is marked by KH). After fishing the cable through the rubber gasket, (located in the wall) it
has to be connected to connection box J11.
Connector connection is performed strictly according to numeration given in
wiring diagram, or adequate markings (see wiring diagram).
When disconnecting unit sections, do not pull by connecting wires and cables!
Before starting any operations inside the unit, make sure that the unit is switched
off and the power supply voltage is shut off.
1.3 Picture
Kitchen Hood Connection
1.4. Control Contacts Connection
Air handling units with the C4 controller have the connection of additional device (switch, sensor, timer, button
etc). For this function external cable is brought out from the unit (see 1.4 Picture). Detailed description of connec-
tion possibilities is provided in chapter 2.6.
1.4 Picture
Connection of additional control device
Summary of Contents for DOMEKT series
Page 43: ...43 Wiring Diagram ...
