background image

                        

EU  ENVIORNMENTAL  DIRECTIVES 

 

RoHS  

This product is compliant with the EU Directive 2011/65/EU for

 

the Restriction 

of the use of Certain Hazardous Substances in Electrical and Electronic Equipment. No 

lead (Pb), cadmium (Cd), mercury (Hg), hexavalent chromium (Cr+6), PBB or PBDE is 

intentionally added to this device. Any traces of impurities of these substances contained 

in the parts are below the RoHS specified threshold levels. 

 

REACh  

This product is compliant with the European Union Directive

 

EC1907/206 for 

the Registration, Evaluation, Authorization, and Restriction of chemicals (REACh) and 

contains none or less than 0.1% of the chemicals listed as hazardous chemicals in the 

REACh regulation. 

 

WEEE 

This symbol on the product or its packaging indicates that

 

this product must 

not  be  disposed  of  with  other  waste.  Instead,  it  is  your  responsibility  to  dispose  of 

your  waste  equipment  by  handing  it  over  to  a  designated  collection  point  for  the 

recycling  of  waste  electrical  and  electronic  equipment.  The  separate  collection  and 

recycling of your waste equipment at the time of disposal will help conserve natural 

resources and ensure that it is recycled in a manner that protects human health and the 

environment.  For  more  information  about  where  you  can  drop  off  your  waste 

equipment for recycling, please contact  your local city recycling office or the dealer 

from whom you purchased the product. 

 

CE   

This  product  complies  with  the  European  Union  Council  Directives

 

and 

Standards relating to electromagnetic compatibility EMC Directive (2006/95/EC) and 

the Low Voltage Directive (2004/10) 

 

 
 
 

 
 
 
 
 
 
 
 
Copyright 1999-2017, Komet

Amplification. Group, L.L.C.  May not be reproduced in any form without express written consent from Komet

Amplification. 

Summary of Contents for 19
























Reviews: