Version 2.1, 07/2019
page 11 of 27
3.
Preparing for first label printing
3.1.
Insert labels with a GAP
Place the label roll on the dispenser as shown and thread it into the printer. The labels
should lie flush against the left fixed stop.
Now move up the movable right stop and fix it with the knurled screw. The labels should
have as little play as possible between the stops, while the carrier material must not be
crushed. The label web must always be completely smooth and easy to move through the
feeder.
Carefully advance the label web to the threading point (first noticeable resistance).
