27
5.
The toolbox has been installed and is ready to use. Connect the printer with
the computer. The “Installing device driver software” message in the taskbar
will pop up.
Note:
There is no USB or parallel cable included in the scope of delivery!
6.
The printer is ready to use as soon as the message below appears. Click on
“CLOSE” to finish the installation process.
Read in the next section how to start and how to work with the toolbox.
5
5
28
Work with the toolbox
The toolbox serves to make printer settings and to use the special functions. The
toolbox can be used independently of the printer driver and communicates
permanently with the printer. It displays the actual status of the printer. To start the
toolbox proceed as indicated below.
Note:
The toolbox does NOT work with Windows XP.
1.
Go to „START/ PROGRAMS/STARTUP/KOMDRUCK IDP TOOLBOX“ to
start the toolbox.
