6.
Set the lock lever to LOCK position (L).
7.
Stop the engine.
8.
Remove the mat and the drain plug (2).
9.
Wash the floor with water and let the dirt flow through hole
(1).
10. After washing, dry the floor as well as the control pedals if
necessary; reposition plug (2) and the mat.
METHOD FOR CHECKING GAS SPRING
k
k
WARNING
The gas spring is charged with high-pressure nitrogen gas, so improper handling may cause an explo-
sion resulting in serious personal injury or death. When handling, always observe the following.
• Do not disassemble.
• Do not bring open flame close to it or do not dispose of it in fire.
• Do not perform drilling, welding or flame-cutting.
• Do not hit or roll it, or subject it to any impact.
• When disposing of it, the gas must be released. Ask your Komatsu distributor to have this work per-
formed.
MAINTENANCE PROCEDURE
MAINTENANCE
4-30
WENAM00061
Summary of Contents for PW98MR-10
