Komatsu PC45MR-30403, Operation And Maintenance Manual

Page: 284 / 475

11. Place the machine at the specified position on the trailer.
METHOD FOR SECURING MACHINE
NOTICE
• To prevent damage to the bucket cylinder during transportation, put a wooden block under the tip of
the bucket link to prevent the bucket cylinder from touching the floor.
• Do not use the fixing hole at the rear of the track frame for towing or lifting the machine.
After loading the machine onto a trailer, secure the machine as follows.
1.
Set the machine in the posture shown in the figure.
1) Push the blade control lever forward to lower the
blade to the ground.
2) Operate the work equipment control levers to extend
bucket cylinder and arm cylinder to their stroke end,
and then lower the boom gently.
Put a block under the tip of the bucket link to prevent
the bucket cylinder from touching the floor.
3) Set the lock lever securely to LOCK position (L).
Be sure to operate the lock lever by the operating por-
tion on the top.
4) Stop the engine, then remove the key from the starting
switch.
2.
Close all of the doors, windows, and covers.
3.
Lock all of the doors and covers which have lock.
4.
Prevent the machine from moving during transportation, by
putting wooden blocks on the front and rear sides of the
tracks.
5.
Fix the machine securely with chains or wire ropes of prop-
er strength to prevent it from side slip.
REMARK
Use the hole at side plate of blade and fixing hole at rear
of the track frame to secure the machine with the chain or
wire rope.
OPERATION TRANSPORTATION
3-223