Komatsu PC16R-3, Operation & Maintenance Manual

Page: 52 / 288

PRECAUTIONS TO BE TAKEN WHEN WORKING
50
2.4 PRECAUTIONS TO BE TAKEN WHEN WORKING
2.4.1 STARTING THE ENGINE
q
Before getting on the machine, walk around it and check for
people and objects that might be in the way.
q
Do not start the engine if warning plates have been attached to
the control levers.
q
Before starting the engine, make sure that the controls are
locked.
q
When starting the engine, sound the horn as an alert signal.
q
Start the engine only while seated with fastened seat belt.
q
Do not allow anyone to get on the machine.
q
Make sure that the platform fastening screws (1) are well tight-
ened. Incorrect tightening of the cab floor may lead to serious
injury.
If any anomaly is found, provide for the necessary repairs.
2.4.2 CHECK THE DIRECTION BEFORE
STARTING THE MACHINE
q
Before operating the travel levers, check the position of the
blade.

If the blade is positioned on the rear part of the machine, the op-
eration of the travel levers is inverted.

In this condition, take care not to mistake the travel movements
during the use of the machine.

(See "3.3.5 HOW TO MOVE THE MACHINE").
RKA01430
WEAM012405