Komatsu PC118MR-8, Operation And Maintenance Manual

Page: 324 / 418

MAINTENANCE PROCEDURES
MAINTENANCE
4-38
WASHING THE FLOOR 4
The floor can be washed with water.
WARNING
q
When the machine is inclined, use blocks to stabilize it and carry out the necessary operations very
carefully.
q
If the control levers are inadvertently touched, the work equipment or the machine may move
suddenly and cause serious accidents. Before leaving the operator seat, shift the safety lever to the
LOCK position (L).
q
When washing the cab floor, avoid wetting the connector and the filters of the air conditioner.
How to incline the machine
q
How to proceed on a slope
CAUTION
Find a compact and level slope.
1. Stop the machine so that the work equipment is positioned
facing downward.
2. Place some blocks under the track and plant the working
tools on the ground.
q
How to proceed using a block
CAUTION
q
Find an area where the ground is even and compact.
q
Position some blocks under the frame to stabilize the
machine; carry out this operation with the maximum
care.
1. Lift the machine using the boom and arm.

Operate the levers slowly.
2. Insert a block firmly between the ground and the lifted track
and make sure that the machine is stable.
3. Lift the boom slowly and lower the machine. Make sure
that the machine is always stable during this operation.
WEAM014802