Komatsu HB215LC-3, Operation & Maintenance Manual

Page: 109 / 492

AFTERTREATMENT DEVICES REGENERATION DISPLAY
This displays the regeneration status and automatic regenera-
tion setting status of the aftertreatment devices.
(A): Comes on during regeneration.
(B): Comes on when setting automatic regeneration disable.
LOCK LEVER PILOT LAMP
The lock lever pilot lamp lights up when the lock lever is in LOCK position.
It goes out when the lock lever is set in FREE position.
ECO GUIDANCE
The guidance for energy saving operation to reduce the fuel
consumption may be displayed during operation.
The details of the guidance are as follows:
Idling stop guidance
If no operation is performed for more than 5 minutes, and the
engine is idling, the idling stop message is displayed on the
machine monitor. When waiting for work or taking short break,
stop the engine to reduce unnecessary fuel consumption.
The idling stop message goes out if any lever is operated again
or if the switch F5 is pressed.
OPERATION EXPLANATION OF COMPONENTS
3-37