Komatsu Galeo PC400-7, Brochure

Page: 6 / 9

10
ENGINE
Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SAA6D125E-3
Type . . . . . . . . . . . . . . . . . . . . Water-cooled, 4-cycle, direct injection
Aspiration. . . . . . . . . . . . . . . . . . . . . . . . . Turbocharged, aftercooled
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
125 mm 4.92"
Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 mm 5.91"
Piston displacement. . . . . . . . . . . . . . . . . . . . . . . . . 11.04 ltr 674 in 3
Flywheel horsepower:
ISO 9249 / SAE J1349. . . . . . . . . . . . . . . . Gross 259 kW 347 HP
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Net 246 kW 330 HP
Rated rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1850 rpm
Governor . . . . . . . . . . . . . . . . . . . . . . . . All-speed control, electronic
HYDRAULICS
Type . . HydrauMind (Hydraulic Mechanical Intelligence New Design)
system, closed-center system with load sensing valves and
pressure compensated valves
Number of selectable working modes . . . . . . . . . . . . . . . . . . . . . . . 3
Main pump:
Type . . . . . . . . . . . . . . . . . . . . . Variable displacement piston type
Pumps for . . . . . . . . Boom, arm, bucket, swing, and travel circuits
Maximum flow . . . . . . . . . . . . . . . . .
690 ltr/min 182 U.S. gal/min
Supply for control circuit . . . . . . . . . . . . . . . . . Self-reducing valve
Hydraulic motors:
Travel . . . . . . . . . . . . . . . 2 x axial piston motor with parking brake
Swing . . . . . . . . . . 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits . . . . . . . . . . . 37.3 MPa 380 kgf/cm 2 5,400 psi
Travel circuit. . . . . . . . . . . . . . . . 37.3 MPa 380 kgf/cm 2 5,400 psi
Swing circuit. . . . . . . . . . . . . . . . 27.9 MPa 285 kgf/cm 2 4,050 psi
Pilot circuit . . . . . . . . . . . . . . . . . . . . 3.2 MPa 33 kgf/cm 2 470 psi
Hydraulic cylinders:
(Number of cylinders – bore x stroke x rod diameter)
Boom . . . . . 2 – 160 mm x 1570 mm x 110 mm 6.3" x 61.8" x 4.3"
Arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . except 2.4 m 7'10"
1 – 185 mm x 1820 mm x 120 mm 7.3" x 71.7" x 4.7"
Arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . for 2.4 m 7'10"
1 – 185 mm x 1590 mm x 120 mm 7.3" x 62.6" x 4.7"
Bucket. . . . . . 1 – 160 mm x 1270 mm x 110 mm 6.3" x 50" x 4.3"
DRIVES AND BRAKES
Steering control . . . . . . . . . . . . . . . . . . . . . . . Two levers with pedals
Drive method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydrostatic
Maximum drawbar pull . . . . . . . . . . . . . 329 kN
33510 kgf 73,880 lb
Gradeability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70%, 35°
Maximum travel speed: High . . . . . . . . . . . . . . . . .
5.5 km/h 3.4 mph
(Auto-Shift) Low . . . . . . . . . . . . . . . . . 3.0 km/h 1.9 mph
Service brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lock
Parking brake . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical disc brake
SWING SYSTEM
Drive method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydrostatic
Swing reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Planetary gear
Swing circle lubrication . . . . . . . . . . . . . . . . . . . . . . . Grease-bathed
Service brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lock
Holding brake/Swing lock . . . . . . . . . . . . . . . . Mechanical disc brake
Swing speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.0 rpm
UNDERCARRIAGE
Center frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-frame
Track frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Box-section
Seal of track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sealed track
Track adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic
Number of shoes (each side):
PC400-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
PC400LC-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Number of carrier rollers . . . . . . . . . . . . . . . . . . . . . . . . . 2 each side
Number of track rollers (each side):
PC400-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
PC400LC-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
COOLANT AND LUBRICANT
CAPACITY
(REFILLING)
Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 650 ltr 172 U.S. gal
Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34.2 ltr 9.0 U.S. gal
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38.0 ltr 10.0 U.S. gal
Final drive, each side . . . . . . . . . . . . . . . . . . . . . 12.0 ltr 3.2 U.S. gal
Swing drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.2 ltr 4.3 U.S. gal
Hydraulic tank . . . . . . . . . . . . . . . . . . . . . . . . . . 248 ltr 65.5 U.S. gal
OPERATING WEIGHT
(APPROXIMATE)
Operating weight including 7060 mm 23'2" one-piece boom,
3380 mm 11'1" arm, SAE heaped 1.9 m 3 2.49 yd 3 bucket, rated
capacity of lubricants, coolant, full fuel tank, operator, and standard
equipment.
PC400-7 PC400LC-7
Operating Ground Operating Ground
Shoes Weight Pressure Weight Pressure
600 mm 41400 kg
77.5 kPa
42400 kg
74.5 kPa
0.79 kgf/cm 2 0.76 kgf/cm 2
23.6" 91,270 lb
11.2 psi
93,480 lb
10.8 psi
700 mm 41820 kg
67.7 kPa
42850 kg
64.7 kPa
0.69 kgf/cm 2 0.66 kgf/cm 2
27.6" 92,200 lb
9.81 psi
94,470 lb
9.39 psi
800 mm 42250 kg
59.8 kPa
43300 kg
56.9 kPa
0.61 kgf/cm 2 0.58 kgf/cm 2
31.5" 93,140 lb
8.67 psi
95,460 lb
8.25 psi
11
D,L
K
M
G
A
O
C
E
N
F
I
J
H,Q
P
B
0 1 2 3 4 5 6 7 8 9 10 11 12 13
(m)
(m)
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
H
A
C
B
D
E
G.L
G
F
2440 8'
Bucket Capacity
Number
(heaped) Width Weight Arm Length
SAE, PCSA CECE Without Side Cutters With Side Cutters With Side Cutters
of Teeth
2.4 m 7'10" 2.9 m 9'6" 3.38 m 11'1" 4.0 m 13'1"
1.3 m 3 1.70 yd 3 1.2 m 3 1.57 yd 3 1120 mm 44.1" 1270 mm 50.0" 1115 kg 2,460 lb 4
1.6 m 3 2.09 yd 3 1.4 m 3 1.83 yd 3 1270 mm 50.0" 1420 mm 55.9" 1197 kg 2,640 lb 4
1.9 m 3 2.49 yd 3 1.7 m 3 2.22 yd 3 1475 mm 58.1" 1625 mm 64.0" 1358 kg 2,990 lb 5
□
**1.9 m 3 2.49 yd 3 1.7 m 3 2.22 yd 3 — 1625 mm 64.0" 1966 kg 4,330 lb 5 X
2.06 m 3 2.69 yd 3 1.8 m 3 2.35 yd 3 1565 mm 61.6" 1715 mm 67.5" 1391 kg 3,070 lb 5
□ □ □
**2.1 m 3 2.75 yd 3 1.9 m 3 2.49 yd 3 — 1745 mm 68.7" 2035 kg 4,490 lb 5
X
2.2 m 3 2.88 yd 3 2.0 m 3 2.62 yd 3 1715 mm 67.5" — *1396 kg 3,080 lb 5 X
Arm 2400 mm 7'10" 2900 mm 9'6" 3380 mm 11'1" 4000 mm 13'1"
A Max. digging height 10310 mm 33'10" 10285 mm 33'9" 10915 mm 35'10" 11025 mm 36'2"
B Max. dumping height 7070 mm 23'2" 7080 mm 23'3" 7565 mm 24'10" 7715 mm 25'4"
C Max. digging depth 6845 mm 22'6" 7345 mm 24'1" 7820 mm 25'8" 8445 mm 27'8"
D Max. vertical wall
digging depth
5305 mm 17'5" 5700 mm 18'8" 6870 mm 22'6" 7285 mm 23'11"
E Max. digging depth
of cut for 8' level
6650 mm 21'10" 7155 mm 23'6" 7680 mm 25'2" 8315 mm 27'3"
F Max. digging reach 11080 mm 36'4" 11445 mm 37'7" 12025 mm 39'5" 12565 mm 41'3"
G Max. digging reach
at ground level
10855 mm 35'7" 11230 mm 36'10" 11820 mm 38'9" 12365 mm 40'7"
H Min. swing radius 4835 mm 15'10" 4810 mm 15'9" 4735 mm 15'6" 4800 mm 15'9"
Bucket digging force 241 kN 240 kN 239 kN 239 kN
at power max. 24600 kgf /54,230 lb 24500 kgf /54,010 lb 24400 kgf /53,790 lb 24400 kgf /53,790 lb
Arm crowd force 241 kN 245 kN 205 kN 184 kN
at power max. 24600 kgf /54,230 lb 25000 kgf /55,120 lb 20900 kgf /46,080 lb 18800 kgf /41,450 lb
Bucket digging force 277 kN 276 kN 275 kN 270 kN
at power max. 28200 kgf /62,170 lb 28100 kgf /61,950 lb 28000 kgf /61,730 lb 27500 kgf /60,630 lb
Arm crowd force 254 kN 257 kN 214 kN 190 kN
at power max. 25900 kgf /57,100 lb 26200 kgf /57,760 lb 21800 kgf /48,060 lb 19400 kgf /42,770 lb
Arm Length 2400 mm 7'10" 2900 mm 9'6" 3380 mm 11'1" 4000 mm 13'1"
A Overall length 11905 mm 39'1" 11995 mm 39'4" 11940 mm 39'2" 11950 mm 39'2"
B Length on ground (transport): PC400-7 8210 mm 26'11" 7310 mm 24'0" 6540 mm 21'5" 6165 mm 20'3"
PC400LC-7 8375 mm 27'6" 7475 mm 24'6" 6705 mm 22'0" 6330 mm 20'9"
C Overall height (to top of boom) 3850 mm 12'8" 3745 mm 12'3" 3635 mm 11'11" 3885 mm 12'9"
WORKING RANGE
DIMENSIONS
: General purpose use, density up to 1.8 ton/m 3 1.52 U.S. ton/yd 3 X : Not usable
□
: General purpose use, density up to 1.5 ton/m 3 1.26 U.S. ton/yd 3 * : Without side cutters
: Light duty work, density up to 1.2 ton/m 3 1.01 U.S. ton/yd 3 ** : Quarry bucket (with side shroud)
BACKHOE BUCKET, ARM, AND BOOM COMBINATION
ISO rating SAE rating
PC400-7 PC400LC-7
D Overall width 3340 mm 11'0" 3440 mm 11'3"
E Overall height (to top of cab) 3265 mm 10'9" 3265 mm 10'9"
F Ground clearance, counterweight 1320 mm 4'4" 1320 mm 4'4"
G Ground clearance (minimum) 555 mm 1'10" 550 mm 1'10"
H Tail swing radius 3645 mm 12'0" 3645 mm 12'0"
I Track length on ground 4020 mm 13'2" 4350 mm 14'3"
J Track length 5025 mm 16'6" 5355 mm 17'7"
K Track gauge 2740 mm 9'0" 2740 mm 9'0"
L Width of crawler 3340 mm 11'0" 3440 mm 11'3"
M Shoe width 600 mm 23.6" 700 mm 27.6"
N Grouser height 37 mm 1.5" 37 mm 1.5"
O Machine cab height 2715 mm 8'11" 2715 mm 8'11"
P Machine cab width 2995 mm 9'10" 2995 mm 9'10"
Q Distance, swing center to rear end 3605 mm 11'10" 3605 mm 11'10"
H
Y D R A U L I C
E
X C A V A T O R
S
PECIFICATIONS
HYDRAULIC EXCAVATOR
PC400-7
PC400-7