Komatsu Galeo HM350-1 Brochure Download Page 9

AXLES

Full time all wheel drive with 100% differential lock in all axles.
Final drive type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Planetary gear
Ratios:

Differential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.231
Planetary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.941

TRANSMISSION

Torque converter . . . . . . . . . . . . . . . . . 3-elements, 1-stage, 2-phase
Transmission . . . . . . . . . . . . . . . . . Full-automatic, counter-shaft type
Speed range . . . . . . . . . . . . . . . . . . 6 speeds forward and 2 reverse
Lockup clutch . . . . . . . . . . . . . . . . . . . . . . . . . Wet, single-disk clutch
Forward . . . . . . . . . . . . . . . . . . . . Torque converter drive in 1st gear,

direct drive in 1st lockup and all higher gears

Reverse. . . . . . . . . Torque converter drive and direct drive in all gear
Shift control . . . . . . . . . . . . . . . Electronic shift control with automatic

clutch modulation in all gear

Maximum travel speed  . . . . . . . . . . . . . . . . . . 57.0 km/h

35.4 mph

S

PECIFICATIONS

S

PECIFICATIONS

WEIGHT (APPROXIMATE)

Empty weight . . . . . . . . . . . . . . . . . . . . . . . . . . 28550 kg   

62,940 lb

Gross vehicle weight. . . . . . . . . . . . . . . . . . . . . 60925 kg 

134,320 lb

Weight distribution:

Empty: Front axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55.5%

Center axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.25%
Rear axles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.25%

Loaded: Front axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30.4%

Center axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34.8%

Rear axles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34.8%

ENGINE

Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SAA6D140E-3
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Water-cooled, 4-cycle
Aspiration . . . . . . . . . . . . . . Turbo-charged and air-to-air after-cooled
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 mm 

5.51"

Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 mm 

6.50"

Piston displacement. . . . . . . . . . . . . . . . . . . . . . . . . 15.24 ltr 

930 in

3

Performance:

Gross horsepower . . . . . . . . . . . . . . . . . . . . . . . . 298 kW 

399 HP

Flywheel horsepower . . . . . . . . . . . . . . . . . . . . . . 290 kW 

389 HP

Rated RPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000 RPM
Maximum torque . . . . . . . . . . . . . . . . . . . . . . . 199 kg•m 

1,439 ft. lb

Fuel system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Direct injection
Governor . . . . . . . . . . . . . . . . . . . . . . . . . . . Electronically controlled
Lubrication system

Method . . . . . . . . . . . . . . . . . . . . . . . Gear pump, force-lubrication
Filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Full-flow type

Air cleaner. . . . . . . . . . . . . . . . . . Dry type with double elements and

precleaner (cyclopack type), plus dust indicator

SUSPENSION SYSTEM

Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydro-pneumatic suspension
Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Combined hydro-pneumatic 

and rubber suspension system

MAIN FRAME

Type . . . . . . . . . . . . . . . . . . . . . . . . . Articulated type, box-sectioned

construction on front and rear 

STEERING SYSTEM

Type . . . . . . . . . . . . . . . Articulated type, fully hydraulic power steering

with two double-acting cylinders.

Supplementary steering . . . . . . . . . . . . . . . . . . Automatically actuated,

electrically powered (meets SAE J695B)

Minimum turning radius, wall to wall . . . . . . . . . . . . . . . . . . 8.4 m 

27'7"

Articulation angle . . . . . . . . . . . . . . . . . . . . . . . . . . . 45° each direction

BRAKES

Service brakes . . . . . . . . . . . . . . . . . . Full-hydraulic control, oil-cooled

multiple-disc type on all wheels

Parking brake . . . . . . . . . . . . . . . . . . . Spring applied, caliper disc type
Retarder. . . . . . . . . . . . . . Front and center axle brakes act as retarder

BODY

Capacity:

Struck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.6 m

3

19.1 yd

3

Heaped (2:1, SAE) . . . . . . . . . . . . . . . . . . . . . . . 19.8 m

25.9 yd

3

Payload . . . . . . . . . . . . . . . . . . . . . . 32.3 metric tons 

35.6 U.S. tons

Material . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 kg/mm

184,925 PSI

high tensile strength steel

Material thickness:

Bottom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 mm 

0.63"

Front. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 mm 

0.31"

Sides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 mm 

0.47"

Target area 

(inside length x width) . . . . . . . 5285 mm x 2995 mm 

17'4" x 9'10"

Heating . . . . . . . . . . . . . . . . . . . . . . . . . . . . Exhaust heating  (option)

HYDRAULIC SYSTEM

Hoist cylinder . . . . . . . . . . . . . . . . . . . Twin, 2 -stage telescopic type
Relief pressure . . . . . . . . . . . . . . . . 20.6 Mpa 210 kg/cm

2,990 PSI

Hoist time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 sec

CAB

Dimensions comply with ISO 3471 and SAE J1040-1988c ROPS
(Roll-Over Protective Structure) standards

TIRES

Standard tire. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26.5 R25

SERVICE REFILL CAPACITIES

Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . 495 ltr.

130.8 U.S. Gal

Engine oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 ltr.

13.7 U.S. Gal

Torque converter, transmission and

retarder cooling . . . . . . . . . . . . . . . . . . . . . . 115 ltr.

30.4 U.S. Gal

Differentials (total) . . . . . . . . . . . . . . . . . . . . . . . 85 ltr.

22.5 U.S. Gal

Final drives (total). . . . . . . . . . . . . . . . . . . . . . . . . 27 ltr.

7.1 U.S. Gal

Hydraulic system . . . . . . . . . . . . . . . . . . . . . . . 180 ltr.

47.6 U.S. Gal

Suspension (total) . . . . . . . . . . . . . . . . . . . . . . . 20.4 ltr.

5.4 U.S. Gal

HM350-1

ARTICULATED DUMP TRUCK

9

Summary of Contents for Galeo HM350-1













Reviews: