7
6
S
PECIFICATIONS
D85ESS
D85ESS-2A
C
R A W L E R
D
O Z E R
CRAWLER DOZER
ENGINE
Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu S6D125E-2
Type . . . . . . . . . . . . . . . 4-stroke cycle, water-cooled, direct injection
Aspiration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Turbocharged
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Bore x stroke. . . . . . . . . . . . . . . . .
125 mm
x
150 mm
4.92" x 5.91"
Piston displacement. . . . . . . . . . . . . . . . . . . . . . . . .
11.04 ltr
674 in
3
Governor . . . . . . . . . . . . . . . . . . . . . . . . . . . . All-speed, mechanical
Horsepower
ISO 9249 / SAE J1349 . . . . . . . . . . . . . . . . . . Net
149kW
200HP
Rated rpm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1950rpm
Fan drive type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical
Lubrication system
Method . . . . . . . . . . . . . . . . . . . . . . Gear pump, forced lubrication
Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Full-flow
Net maximum torque. . . . . 981 N•m
100 kg•m
723 lb ft @ 1200 rpm
TORQFLOW TRANSMISSION
Komatsu’s TORQFLOW transmission consists of a water-cooled,
3-element, 1-stage, 1-phase torque converter and a planetary gear,
multiple-disc clutch transmission which is hydraulically actuated and
force-lubricated for optimum heat dissipation. Joystick control of
gears (3 forward and 3 reverse) and directional steering changes.
Gearshift lock lever and neutral safety switch prevent machine
from accidental starts.
Travel speed
Forward
Reverse
1st
0–3.9 km/h
0–2.4 mph
0–5.0 km/h
0–3.1 mph
2nd
0–6.8 km/h
0–4.2 mph
0–8.6 km/h
0–5.3 mph
3rd
0–10.6 km/h
0–6.6 mph
0–13.4 km/h
0–8.3 mph
0
14
12
10
8
6
4
2
km/h
0
10
30
20
mph
0
8
6
4
2
0
40
80
120
280
160
320
200
240
0
8
16
24
56
32
64
40
48
Drawbar pull
Travel speed
lb x 10
3
kg x 10
3
kN
F1
F2
F3
D85ESS-2A
Power Shift
DRAWBAR PULL
VS
. SPEED.
MAXIMUM USABLE PULL
DEPENDS ON TRACTION AND
WEIGHT OF TRACTOR
INCLUDING MOUNTED
EQUIPMENT.
FINAL DRIVES
Double-reduction final drives of spur gear and planetary gears to
minimize transmission of shocks to power train components.
Segmented sprocket are bolt-on for easy in-the-field replacement.
COOLANT AND LUBRICANT
CAPACITY (
REFILL
)
Coolant. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
52 ltr
13.7 U.S. gal
Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . .
406 ltr
107.3 U.S. gal
Engine oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
38 ltr
10.0 U.S. gal
Damper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.7 ltr
0.4 U.S. gal
Transmission, bevel gear,
and steering system . . . . . . . . . . . . . . . . . . .
48 ltr
12.7 U.S. gal
Final drive (each side). . . . . . . . . . . . . . . . . . . .
27 ltr
7.1 U.S. gal
STEERING SYSTEM
Joystick controls for all directional movements. Pushing the joystick
forward results in forward machine travel, while pulling it rearward
reverses the machine. Simply tilt the joystick to the left to make a
left turn. Tilt it to the right for a right turn.
Wet, multiple-disc steering clutches are hydraulically loaded and
hydraulically released. Wet, multiple-disc brakes are spring-actuated
and hydraulically released.
Steering brakes also function as service and parking brakes.
Minimum turning radius*:. . . . . . . . . . . . . . . . . . . . . . . . .
3.4 m
11'2"
*As measured by track marks on ground.
UNDERCARRIAGE
Suspension . . . . . . . . . . . . . . . . . . . . . Oscillation with equalizer bar
and forward mounted pivot shafts
Track roller frame . . . . . . . . . . . . . . . . . . . Monocoque, large section,
durable construction
Track shoes. . . . . . . . . . . . . . . . Lubricated tracks. Unique dust seals
for preventing entry of foreign abrasives into
pin-to-bushing clearances for extended service.
Track tension is easily adjusted with a grease gun.
Number of carrier rollers (each side) . . . . . . . . . . . . . . . . . . . . . . . . 2
Number of track rollers (each side) . . . . . . . . . . . . . . . . . . . . . . . . . 8
Ground contact area . . . . . . . . . . . . . . . . . . . . .
30400 cm
2
4,710 in
2
Ground pressure . . . . . . . . . . . . . . . .
50.0 kPa
0.50 kg/cm
2
7.25 psi
OPERATING WEIGHT
Tractor weight:
Including rated capacity of lubricant, coolant, full fuel tank, operator
and standard equipment. . . . . . . . . . . . . . . . . . .
15420 kg
34,000 lb
Operating weight:
Including angle dozer, multi-shank ripper, FRP canopy(optional),
operator, standard equipment, and rated capacity of lubricants,
coolant, and full fuel tank. . . . . . . . . . . . . . . . . . .
20670 kg
45,570 lb
HYDRAULIC SYSTEM
Closed-center load sensing system (CLSS) designed for precise
and responsive control, and for efficient simultaneous operation.
Hydraulic control units:
All spool control valves externally mounted beside the hydraulic tank.
Type of pump:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Gear pump
Capacity (discharge flow at rated engine rpm):
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
180 ltr/min
47.6 U.S. gal/min
Relief valve setting . . . . . . . . . . . . .
20.6 MPa
210 kgf/cm
2
2,990 psi
Hydraulic cylinders . . . . . . . . . . . . . . . . . . . . . . Double-acting, piston
Control valves:
Spool control valve for semi-U tilt dozer and straight tilt dozer.
Positions: Blade lift . . . . . . . . . . . . . . . Raise, hold, lower, and float
Blade tilt . . . . . . . . . . . . . . . . . . . . . Right, hold, and left
Spool control valve for angle dozer.
Positions: Blade lift . . . . . . . . . . . . . . . Raise, hold, lower, and float
Additional control valve for multi-shank ripper
Positions:Ripper lift . . . . . . . . . . . . . . . . . . . Raise, hold, and lower
Hydraulic oil capacity (refilling):
Straight tilt dozer. . . . . . . . . . . . . . . . . . . . . .
55.0 ltr
14.5 U.S. gal
Angle tilt dozer . . . . . . . . . . . . . . . . . . . . . . .
55.0 ltr
14.5 U.S. gal
Multi-shank ripper . . . . . . . . . . . . . . . . . . . . .
55.0 ltr
14.5 U.S. gal
Number of cylinders
Bore
Blade lift
2
95 mm
3.74"
Blade tilt
1
140 mm
5.51"
Ripper lift
1
140 mm
5.51"
Remarks:
*
Blade capacities are based on the SAE recommendation practice J1265.
DOZER EQUIPMENT
Use of high tensile strength steel in moldboard for strengthened blade construction.
Overall Maximum
Maximum
Additional weight
length
Blade
Blade
Maximum lift
drop
tilt
Angling
Dozer
Hydraulic
with dozer
capacity*
length x height
above ground
below ground
adjustment
angle
equipment
control unit
5930 mm
3.4 m
3
4370 mm x 1070 mm
1255 mm
485 mm
400 mm
2890 kg
540 kg
AngleDozer
19'5"
4.4 yd
3
14'4" x 3'6"
4'1"
1'7"
1'4"
25 degree
6,370 lb
1,190 lb
Straight
5615 mm
4.4 m
3
3620 mm x 1295 mm
1070 mm
590 mm
460 mm
2220 kg
590 kg
Tilt Dozer
18'5"
5.8 yd
3
11'11" x 4'3"
3'6"
1'11"
1'6"
--
4,890 lb
1,300 lb
Semi-U
5770 mm
6.8 m
3
3640 mm x 1565 mm
1070 mm
590 mm
460 mm
2520 kg
590 kg
Tilt Dozer
18'11"
8.9 yd
3
11'11" x 5'2"
3'6"
1'11"
1'6"
--
5,560 lb
1,300 lb
DIMENSIONS
Ground clearance
. . . . . . . . . . . . . .
400 mm
1'4"
A
2050 mm
6'9"
H
5615 mm
18'5"
B
3620 mm
11'11"
I
3160 mm
10'4"
C
1295 mm
4'3"
J
65 mm
2.6"
D
2980 mm
9'9"
K
1220 mm
4'0"
E
1070 mm
3'6"
L
2170 mm
7'1"
F
590 mm
1'11"
M
950 mm
3'1"
G
2980 mm
9'9"
Dimension with straight tilt dozer and multi-shank ripper.
A
C
D
E
F
J
I
H
K
G
G.L.
B
L
M
M