Komatsu D65EXi-18, Operation & Maintenance Manual

Page: 134 / 184

6.
On “Position Details” screen, select “Layer:” (name of layer
to use) and “Point description:” (explanation of point).
When you select “<new description>” as “Point descrip-
tion:”, you can set the point description by using the alpha-
numeric keyboard.
7.
Press “Ok”.
The screen returns to the “Position Check” screen.
8.
Press “Cancel”.
The screen returns to the main window.
REMARK
If you cannot change the layer on “Position Details” screen, disable the Topo survey function. For detail, see
“PERFORM TOPOGRAPHIC SURVEYS (4-46)”.
NAVIGATE POINTS
You can select a navigation/survey point and navigate the machine to that point.
As a navigation/survey point, you can select a point of any layer in the project file.
METHOD FOR NAVIGATING POINTS
You can navigate to points by using the pop-up menu as well.
When using the pop-up menu, see “METHOD FOR NAVIGATING POINTS (4-82)”.
1.
On the main window, press “iB logo key” and display the
main menu.
2.
On “Tools” menu, press “Navigate...” and select.
3.
Press “Add/Remove...”.
The point is added/deleted to/from the list.
4.
Select a point
5.
Press “Ok”.
AJD02637
AJD02638
AJD02639
TOOLS MENU HANDLE CONTROL BOX
4-44