Manual shift mode
Set the starting speed range.
METHOD FOR GEARSHIFTING OPERATION USING PRESET MODE FUNCTION
The preset mode selection is the function to set the maximum travel speed range (automatic shift mode) or
starting speed range (manual shift mode).
You can select a shift mode by pressing up switch (a) or down
switch (b) while the joystick (steering, directional and gear shift
lever) is in N (Neutral) position.
Automatic shift mode
• F1-R1 mode
• F1-R2 mode
• F2-R2 mode
• F2-R3L mode
Manual shift mode
• F1-R1 mode
• F1-R2 mode
• F2-R2 mode
The selected shift mode is displayed in the speed range display
section of the machine monitor.
Shift operation when “F1-R1” mode is set
When the joystick (steering, directional and gear shift lever) is
titled forward (forward travel operation), the speed range is set
to F1. When it is tilted back (reverse travel operation), the
speed range is set to R1.
Shift operation when “F1-R2” mode is set
When the joystick (steering, directional and gear shift lever) is in N (Neutral) position, if you press the up switch
twice, “F1-R2” mode is selected. Then, when the joystick (steering, directional and gear shift lever) is titled for-
ward (forward travel operation), the speed range is set to F1. When it is tilted back (reverse travel operation),
the speed range is set to R2.
Shift operation when “F2-R2” mode is set
When the joystick (steering, directional and gear shift lever) is in N (Neutral) position, if you press the up switch
twice, “F2-R2” mode is selected. Then, when the joystick (steering, directional and gear shift lever) is titled for-
ward (forward travel operation), the speed range is set to F2. When it is tilted back (reverse travel operation),
the speed range is set to R2.
Shift operation when “F2-R3L” mode is set
When the joystick (steering, directional and gear shift lever) is in N (Neutral) position, if you press the up switch
3 times, “F2-R3L” mode is selected. Then, when the joystick (steering, directional and gear shift lever) is titled
forward (forward travel operation), the speed range is set to F2. When it is tilted back (reverse travel operation),
the speed range is set to R3L.
OPERATION
MACHINE OPERATIONS AND CONTROLS
3-183
Summary of Contents for D155AX-8E0
