FOREWORD
PUSH PULL COUPLER
00-10
WB140-2N WB150-2N
12
TYPE 3
00
DISCONNECTION
00
1.
Hold the mouthpiece of the tightening portion and push the body (2)
in straight until sliding prevention ring (1) contacts surface
a
of the
hexagonal portion at the male end.
2.
Hold in the condition in Step 1, and push until the cover (3) contacts
surface
a
of the hexagonal portion at the male end.
3.
Hold in the condition in Steps 1 and 2, and pull out the whole body
(2) to disconnect it.
CONNECTION
00
1.
Hold the mouthpiece of the tightening portion and push the body (2)
in straight until the slide prevention ring (1) contacts surface
a
of the
hexagonal portion at the male end to connect it.