Komatsu Utility 69001, Operation & Maintenance Manual

Page: 44 / 276

PRECAUTIONS DURING OPERATION
SAFETY
2-20
CHECK BEFORE STARTING OPERATION
Before starting the engine, carry out the “CHECK BEFORE STARTING (3-54)“ to confirm that there is no problem
with operating the machine. If this check is not carried out properly, there is danger that it may lead to damage dur-
ing operation or may lead to serious personal injury. When carrying out the checks, stop the machine in a wide
area where there are no obstacles, pay careful attention to the surrounding area, and operate slowly. Do not allow
any person to enter the area around the machine. If any problem is found, always repair the problem.
PRECAUTIONS WHEN TRAVELING IN FORWARD OR REVERSE
q
Operate the machine, being properly seated in the opera-
tor's seat without fail. Otherwise, you may not be able to
freely operate the machine in case of emergency, causing
a serious personal injury.
q
Do not allow anyone else to ride the machine with you. As
there is no passenger seat provided, there is danger that
he or she may be seriously injured, when the machine tips
over during the operation.
q
Always wear the seatbelt. There is danger that you may be
thrown out of the operator's seat and suffer serious injury
when the brakes are applied suddenly.
q
If people are around the machine in the jobsite, there is
danger that they may get hit by or involved in the traveling
machine. Be sure to carry out the following instructions
before starting up the machine.
q
Make sure that there is nobody around the machine
and that there is no obstacle in the traveling path.
q
Blow a horn to warn people in the vicinity.
q
Check that the backup alarm (a reverse travel warning
buzzer) keeps beeping normally, while the machine is
traveling in the reverse direction.
q
If the visibility in the reverse direction is restricted, post
a signalman at an appropriate location.