manualshive.com logo in svg

Komatsu Utility 69001, Operation & Maintenance Manual

The Komatsu Utility 69001 operation & maintenance manual is the go-to resource for anyone seeking comprehensive guidelines on operating and maintaining this exceptional product. Available for free download, this detailed manual ensures a smooth user experience, providing essential insights and instructions. Get yours from manualshive.com today!

Share
Download
background image

IMPORTANT SAFETY INFORMATION

SAFETY

2-2

IMPORTANT SAFETY INFORMATION

2

SAFETY LABELS................................................................................................................................................ 2-4

2

 POSITION FOR ATTACHING SAFETY LABELS .............................................................................................. 2-5

2

 SAFETY LABELS............................................................................................................................................... 2-5

2

PRECAUTIONS COMMON TO OPERATION AND MAINTENANCE............................................................... 2-10

2

 FOR SAFE OPERATION ................................................................................................................................. 2-10

2

 KNOW YOUR EQUIPMENT ............................................................................................................................ 2-10

2

 PREPARE FOR SAFE OPERATION ............................................................................................................... 2-10

2

 CLOTHING AND PERSONAL PROTECTIVE ITEMS ..................................................................................... 2-11

2

 FIRE EXTINGUISHER AND FIRST AID KIT ................................................................................................... 2-11

2

 KEEP THE MACHINE CLEAN ......................................................................................................................... 2-11

2

 IF ABNORMALITIES ARE FOUND.................................................................................................................. 2-11

2

 HANDRAILS AND STEPS ............................................................................................................................... 2-12

2

 MOUNTING AND DISMOUNTING .................................................................................................................. 2-12

2

 INSIDE OPERATOR'S COMPARTMENT........................................................................................................ 2-12

2

 PRECAUTIONS WHEN STANDING UP FROM OPERATOR'S SEAT ........................................................... 2-13

2

 PRECAUTIONS WHEN LEAVING THE MACHINE ......................................................................................... 2-13

2

 EMERGENCY ESCAPE FROM OPERATOR'S CAB ...................................................................................... 2-13

2

 FIRE PREVENTION......................................................................................................................................... 2-14

2

 ACTION IF FIRE OCCURS.............................................................................................................................. 2-15

2

 BATTERY HAZARD PREVENTION ................................................................................................................ 2-15

2

 PRECAUTIONS RELATED TO VENTILATION OF EXHAUST GAS .............................................................. 2-16

2

 BE CAREFUL ABOUT ASBESTOS DUST ...................................................................................................... 2-16

2

PRECAUTIONS DURING OPERATION ........................................................................................................... 2-17

2

 EXAMINATION AND CONFIRMATION OF WORKSITE ................................................................................. 2-17

2

 WORKING ON LOOSE GROUND ................................................................................................................... 2-17

2

 DO NOT GO NEAR HIGH-VOLTAGE CABLES .............................................................................................. 2-17

2

 ENSURE GOOD VISIBILTY ............................................................................................................................ 2-18

2

 CONFIRMATION OF MARK ............................................................................................................................ 2-18

2

 PRECAUTION FOR WARNING TAG .............................................................................................................. 2-18

2

 CHECK BEFORE STARTING ENGINE,ADJUST ............................................................................................ 2-18

2

 PRECAUTIONS WHEN STARTING ................................................................................................................ 2-19

2

 STARTING WITH BOOSTER CABLES ........................................................................................................... 2-19

2

 CHECK BEFORE STARTING OPERATION ................................................................................................... 2-20

2

 PRECAUTIONS WHEN TRAVELING IN FORWARD OR REVERSE ............................................................. 2-20

2

 PRECAUTIONS WHEN TRAVELING .............................................................................................................. 2-21

2

 PRECAUTIONS FOR ACCUMULATED SNOW, AND ICE.............................................................................. 2-21

2

 SHIPPING ........................................................................................................................................................ 2-21

2

 WHEN TOWING .............................................................................................................................................. 2-22

2

PRECAUTIONS FOR MAINTENANCE ............................................................................................................ 2-23

2

 UNAUTHORIZED MODIFICATION ................................................................................................................. 2-23

2

 WARNING TAG ............................................................................................................................................... 2-23

2

 KEEP WORK PLACE FOR MAINTENANCE CLEAN AND TIDY .................................................................... 2-23

2

 REPAIR WELDING .......................................................................................................................................... 2-23

2

 USE CAUTION WHEN FUELING .................................................................................................................... 2-23

2

 PERSONAL MAINTENANCE .......................................................................................................................... 2-23

2

 PROPER TOOLS ............................................................................................................................................. 2-24

2

 SELECTION WORK PLACE FOR MAINTENANCE ........................................................................................ 2-24

2

 STOP ENGINE BEFORE CARRYING OUT INSPECTION AND MAINTENANCE.......................................... 2-24

2

 TWO WORKERS FOR INSPECTION AND MAINTENANCE WHEN ENGINE IS RUNNING ......................... 2-25

2

 WORK UNDER THE MACHINE ...................................................................................................................... 2-25

2

 PRECAUTIONS WHEN USING HAMMER ...................................................................................................... 2-26

2

Summary of Contents for 69001





















































































































































































































































































Reviews:

No comments

Related manuals for 69001

Waterwise 3200 Use & Care Manual preview
3200
Brand: Waterwise Pages: 12
ParaBody 700 Assembly Instruction Sheet preview
700
Brand: ParaBody Pages: 38
GE Responder 2000 Service Manual preview
Responder 2000
Brand: GE Pages: 138
Raven SC1 Accessory Installation Manual preview
SC1
Brand: Raven Pages: 27
Raven SC1 Calibration And Operation Manual preview
SC1
Brand: Raven Pages: 79
Raven SC1 Calibration & Operation Manual preview
SC1
Brand: Raven Pages: 88
B&G H5000 Pilot Calibration Manual preview
H5000 Pilot
Brand: B&G Pages: 3
Bacharach Fyrite Tech 50 Operating And Maintenance Instructions Manual preview
Fyrite Tech 50
Brand: Bacharach Pages: 48
Parker Research Corp B100 Operating Instructions preview
B100
Brand: Parker Research Corp Pages: 4
Eastwood B100 Instructions Manual preview
B100
Brand: Eastwood Pages: 20
Daihan Scientific WiseSpin CF-10 Operation Manual preview
WiseSpin CF-10
Brand: Daihan Scientific Pages: 43
EAW UX8800 Quick Start Manual preview
UX8800
Brand: EAW Pages: 2
abc 907 Instructions For Use Manual preview
907
Brand: abc Pages: 28
Tar River SLC Series Operator'S Manual preview
SLC Series
Brand: Tar River Pages: 26
ZOLL M Series CCT Configuration Manual preview
M Series CCT
Brand: ZOLL Pages: 38
ZOLL aed pro Service Manual preview
aed pro
Brand: ZOLL Pages: 36
Zodiac Pool Systems Nature2 Fusion soft Installation And Operation Manual preview
Nature2 Fusion soft
Brand: Zodiac Pool Systems Pages: 52
Oliver 695 User'S Operating And Instruction Manual preview
695
Brand: Oliver Pages: 38

Brands by name

Popular brands

Load more brands