Vers. 210422
8
Cable between the control unit and the electrovalve
Cable 2 mt to connect the per connessione elettrovalvola cod.
895092/2M.
The 2 mt cable for connection to the electrovalve (code 895092/2M), it
is supplied with a moulded electrovalve connector on one side and 2
wired pin on the opposite side. The red cable must be connected to the
24V “lever / W” or “Motor ON” signal present in the Output connectors
of the Kolver units; while the black one will be connected to the common
0VDC.
NB: some unit models have specific output signals for use with a self-
advancing arm called “Lever / W”.
Sample with CN1
connector on bank
panel of the unit
