POLARIS RANGER
800 XP
68
Kolpin Outdoors Inc.
205 N. Depot St.
Fox Lake, WI 53933
Tel: (920) 928-3118
E-mail:
Important notice:
1. Before the first turning on the hot water heater it is necessary to check the
tightness of the cooling circuit of the hot water heater.
2. If necessary add more cooling liquid to the cooling circuit.
3. Turn UTV’s engine on and open the air vent valve.
4. Turn heater on and wait for the maximum temperature. When the cooling liquid
starts to leak from the air vent valve close the valve.
Turn off heater and add more cooling liquid to the cooling circuit if need it.
In cab units where you are installing the glove compartment heater provided in the
standard DFK Cab Kit, it is important to check the coolant level regularly at least 4-5
times during the first several days of operation and fill as necessary until the coolant
level has stabilized.
The heater will draw and retain coolant, sometimes at the expense of coolant to the
engine.
This can cause engine overheating if not managed properly.