Instr K100349
Rev 01 2021-06
Page 5 of 6
INSTALLATION INSTRUCTIONS
VEHICLE PREPARATION
GENERAL
1. Park vehicle on a flat surface.
2. Shift vehicle into PARK.
3. Turn key to OFF position and remove key.
ACCESSORY INSTALLATION
1. Put plow mounting bracket
q
in position on
vehicle. Line up holes as shown.
2. Put washers
u
and screws
r
in place, thread lock
nuts
t
onto screws.
Do not tighten nuts at this time.
3. Put plate
w
in position inside vehicle frame,
aligning with existing holes and mounting holes in
plow mounting bracket
q
.
4. Put washer
e
and washer
y
on screw
r
as
shown, then install into weld nuts on plate.
5. Torque all screws to specification.
TORQUE
Screw
r
:
34 ft-lbs (46 N·m)
