3.207
IDNP3042 (35 810) Position Switch Enable/Disable Parameter
This IDN can be used to enable or disable the check of each position switch point for the
position switch flag parameter (IDN59) (refer to IDN59, P3041, 3043 and P3044).
Bit
Description
Setting
LSB 0
Position switch point 1 (IDN60)
0 = Disable
1 = Enable Position Switch Flag
1
Position switch point 2 (IDN61)
2
Position switch point 3 (IDN62)
3
Position switch point 4 (IDN63)
4
Position switch point 5 (IDN64)
5
Position switch point 6 (IDN65)
6
Position switch point 7 (IDN66)
7
Position switch point 8 (IDN67)
8 - 15
Reserved.
Data Length: 2 bytes
Non-Volatile:
Yes
Data Type:
Binary
Write Access:
CP2, CP3, CP4
Minimum:
0x0000h
Run-Up Check:
Maximum:
0x00FFh
Cyclic Transfer:
Default:
0
ASCII Param.:
WPOSE
94
sercos
®
for S300/S700
sercos
®
IDN Set
04/2016
Kollmorgen
