Ethernet-Gateway
Configuration
1 Ethernet-Gateway <<N-Port Express DE-311>>
1.1 Introduction
This description refers to the <<N-Port Express DE-311>> Ethernet gateway from <<Moxa Technologies
Ltd>>. Install the program <<dssetup.exe>> from the product CD on your PC to configure the gateway.
You will find this set-up program on the product CD under <<DE-311\software\driver\windows\>>.
The software needs Windows 2000 or Windows XP as an operating system.
1.2 Configuring the Ethernet Gateway
You can choose two ways to configure it:
direct Ethernet connection between the gateway and
PC via CROSS OVER cable
Gateway
Laptop
CROSS OVER - cable
RS232
Ethernet-
connection
interfacing via the standard (in-house) network
Laptop
Ethernet-Network
Gateway
RS232
The descriptions below refer to the
direct
Ethernet connection
that we recommend
and
they require
the standard
factory
setting for the configuration.
If you would like to reconfigure a machine already that has already configured, reset all values to the
standard
factory
setting. Then, to load the factory settings, press the reset button for at least 10 sec.
You can find the reset button on the machine next to the Ethernet interface.
Read the instructions in the machine description!
Please attend to the DIP switches of the ethernet-gateway.
All DIP switches must be located in the OFF position.
1 2 3
ON
ON OFF
23.09.2010
3
