Kollmorgen MMC Smart Drive Series, Hardware Manual

Page: 112 / 386

110 Kollmorgen - June 2014
MMC Smart Drive Hardware Manual
-
230V 3 PHASE MMC SMART DRIVE NEXTGEN
5.2.4.2 External Regen Resistors
There may be applications where an external regen resistor is required (even on the
12A and 24A Drives which contain internal regen resistors). Available external regen
resistors are outlined in
Table 5-24 . For a detailed description of these resistors,
including mounting information, refer to the Kollmorgen “AKD/S700 Accessories
Manual” which can be found at
www.kollmorgen.com .
Table 5-24: External Regen Resistors
For Drive Shunt Resistor Module
Part
Number
MMC-SDN-0.9-
230-D
MMC-SDN-1.8-
230-D
MMC-SDN-3.6-
230-D
33

, 100W Cont. Power, 160W Peak Power BAFP-100-33
33

, 200W Cont. Power, 320W Peak Power BAFP-200-33
33

, 250W Cont. Power, 400W Peak Power BAR-250-33
33

, 500W Cont. Power, 800W Peak Power BAR-500-33
33

, 1.5kW Cont. Power, 2.4kW Peak Power BAR-1500-33
33

, 3kW Cont. Power, 4.8kW Peak Power BAR-3000-33
MMC-SDN-7.2-
230-D
15

, 500W Cont. Power, 800W Peak Power BAR-500-15
15

, 1kW Cont. Power, 1.6kW Peak Power BAR-1000-15
15

, 2kW Cont. Power, 3.2W Peak Power BAS-2000-15
15

, 3kW Cont. Power, 4.8kW Peak Power BAS-3000-15
15

, 6kW Cont. Power, 9.6kW Peak Power BAS-6000-15