Kollmorgen AKD PDMM series, User Manual

Page: 212 / 513

AKD PDMM User Guide | 22.1 AOUT.CUTOFF
22.1 AOUT.CUTOFF
General Information
Type NV Parameter
Description
Sets the analog output low-pass filter cutoff
frequency.
Units Hz
Range 0 to 10,000 Hz
Default
Value
0 Hz
Data Type Float
See Also Analog Output
Start Version M_01-04-01
Fieldbus Information
Description
AOUT.CUTOFF sets the cutoff frequency in Hz for a single-pole low-pass
filter on the Analog Output.
A value of 0 Hz will turn off the filter and will allow all frequencies to pass through.
The filter can be used with all modes of Analog Output.
Related Topics
Analog Output (pg 1)
22.2 AOUT.ISCALE
General Information
Type NV Parameter
Description
Sets the analog current scale fac-
tor.
Units A/V
Range 0.001 to 22.4 A/V
Default
Value
0.001 to 22.4 A/V
Data Type Float
See Also AOUT.VALUE (pg 215)
Start Version M_01-01-01-000
Fieldbus Information
Description
AOUT.ISCALE sets the analog current scale factor that scales the analog output
(AOUT.VALUE) for AOUT.MODE = 4 or 5. The value entered is the motor current per 10 V of
analog input or output. This value may be either higher or lower than 100%, but the actual
analog I/O will be limited by the application current limit (IL.LIMITN (pg 360) and IL.LIMITP (pg
361)).
Related Topics
Analog Output (pg 1)
212 Kollmorgen™ | December 2012