Kollmorgen AKD PDMM series, User Manual

Page: 178 / 513

AKD PDMM User Guide | 17.13 Analog Output (X8, X23)
17.13 Analog Output (X8, X23)
Analog Outputs can be used to output converted analog values of digital measurements recorded in the
drive. The standard drive offers one analog output on X8, drives with built-in I/O option card offer a second
output on X23. A list of the pre-programmed functions is included in the EWV
1
setup software.
Technical characteristics
l
Output voltage range referring to AGND: ±10 V
l
Resolution: 16 Bit and fully monotonic
l
Unadjusted offset: < 50 mV
l
Offset drift typ: 250 µV/°C
l
Gain or slope tolerance: +/- 3%
l
Nonlinearity: < 0.1% of full scale or 10 mV
l
Output impedance: 110 ohms
l
Specification complies with IEC 61131-2 Table 11
l
-3 dB Bandwidth: >8 kHz
l
Maximum output current: 20 mA
l
Capacitive load: any value but response speed limited by max Iout and by Rout
l
Protected for short circuit to AGND
Analog Output Wiring Diagram
1
Embedded Workbench Views
Kollmorgen™ | December 2012 178