11
Daily care and maintenance
To keep the machine running in best status, you are recommended to
regularly clean the machine.
Be sure to cut off the power when cleaning, maintaining and replacing
the
.
filter
Wipe the outside of the machine with clean and soft towel. Open the
front panel, take out the
and use the soft brush to clean the
filter
air inlet grid.
Do not clean any part of the product with gasoline, alcohol, bleach
and other chemical solvents and corrosive cleaners.
Clean the particle sensor
It is recommended to clean the particle sensor every two months.
Properly increase the cleaning times if the local air quality is very severe.
Note: In case of large changes in the indoor temperature and humidity or
high humidity, the condensate water may be formed on the air quality
sensor, resulting in sensor misoperation.
Even though the air quality is high at this time, the display panel may also
display general or poor air quality. In this case, clean the air quality
sensor and it is recommended to set the wind speed in manual mode.