Kolin EU-OSK103, User Manual

Page: 21 / 48

21
1. Make sure your mobile device is already
connected to the wireless network you
want to use. Also, you need to forget all
irrelevant wireless networks in case it
influences you configuration process.
2. Disconnect the power supply of AC (some
units).
3. Connect the power supply of AC and
continuously press the “LED DISPLAY”
button or “DO NOT DISTURB” button seven
times in 10 seconds.
4. When the AC displays “AP”, it means the
AC wireless has already entered into “AP”
mode.
The user must finish all the steps within 8
minutes after powering on the AC or else you
will have to reset and go back again to step 1.
֍ Using iOS device to do network configuration
FOLLOW THE STEPS BELOW:
NOTE: