29
②
Press the
key, distance
measurement starts *1)-*4)
*1) If you want to set automatic distance measurement after power on, please refer to the
steps in Chapter 14 “Setting”.
*2) The unit of distance is “m” (meter) in default ,the distance data will be updated after each
measurement finished along with the beep.
*3) If the measurement result is affected by the atmospheric agitation, the instrument can
repeat the measurement automatically.
*4) If you want to return to the angle measurement mode from the distance measurement
mode, pls press ANG key.
6.4 Changing the Distance Measurement Mode(Repeat Measurement /
Single Measurement/ Track Measurement)
Operation procedure
Operation
Display
①
Aim at the center of the
prism
Aim
