TF.16 IFU StarDevice.003.10-EN 2021-01-12
prepared by Pulavskyi A., Kolyesnik O.
18
treatment.
Bridge
Force
Frequency
Load line
The number of shocks
per point:
25
12
90° to the spine
100
depend’s on the patient’s
tolerance
Tip:
(Tip No.3) a tip long horn
Note
Put your fingers on the patient's forehead so that he reclines his head back as much as possible. Do not
apply force to the reclined head. Start with a neutral position. Once the patient's head began to retreat back,
you should percuss paravertebral muscles at the level of T1 (point 1), let the patient recline maximum his
head back. Return his head to the neutral position. Repeat the procedure at the level of T2 and T3 (points 2
and 3), each time returning the patient to a neutral position. Finally, place the tip on the very back of the
thoracic region (point 4). Instruct the patient to stick out his chest, while maximally to throw back his head
and to bend back. Percuss point 4 to maximize proprioceptive changes, then return the patient to a neutral
position. Repeat the protocol three times a week for one to four weeks. Instruct the patient at home to
apply ice for 20 minutes, then to remove the ice for 40 minutes. Repeat the procedure three times on a day
of treatment.
C.T.S.
Force
Frequency
Load line
The number of shocks
per point:
30-35
4
90° to the spine/a limb
10-15
Tip:
(Tips No1, 6) a medium standard and a small rubber protocol tips.
