• To view the value of coins counted for each denomination press the “REPORT” button.
The denomination will appear on the left and value of coins counted on the right part of
the screen. To display the number of coins counted, press the “+” button.
While in the report mode, pressing the “+” button will switch the display between value of
coins counted or number of coins counted. The KCS-2000 will remember the last setting
chosen for the report display.
• To reset the coin count before starting a new batch, press the “C” button
2.3 Adding
The KCS-2000 operates in ADD mode by default. In ADD mode, the coin count is added
to the count from previous batches. To start a new count, press the “C” button. This will
reset the coin count to zero.
2.4
Setting Batch Quantities
You may batch the desired quantity of each coin denomination. Each denomination can
be assigned a batch quantity.
1. Setting batch quantities for coin rolls
• Press and hold the “+” button for approximately three seconds until “L” is shown in
the display. This automatically programs each coin denomination for bank coin roll
amounts as follows:
7
Denomination
Quantity
$1
25
25¢
40
10¢
50
5¢
40
1¢
50
Denomination
Quantity
$1
100
25¢
350
10¢
900
5¢
450
1¢
300
2. Setting batch quantities for coin trays
• Press and hold the “SET” button for approximately three seconds until “H” is shown
in the display. This automatically programs each coin denomination for coin tray
amounts as follows:
3. Setting other batch quantities
• Press the “SET” until the desired denomination appears on the left part of the screen.
• To assign a batch quantity for this denomination press the “BAT” button until a desired
batch quantity appears on the display
• (0, 10, 20, 25, 50, 80, 100, 120, 150, 200, 300, 400, 500). Fine adjustments to batch
quantity can be made by pressing “-“ or “+” button.
•
Repeat this procedure to set the desired batch quantities for other
coin denominations.
8
