Kolibri KCD-1000 Cleaning Procedure Download

Page: 2 / 3

KB-062019

2019 Kolibri USA

KCD-1000

Cleaning Procedure

Infrared (IR) Sensor:

Locate the small square sensor on the upper part of the bill track as shown below.

Ultraviolet (UV) Sensor:

Locate the 4-part UV sensors as shown below. These pairs of sensors are spaced between the

MG Sensors (metal bar).

Summary of Contents for KCD-1000

Page 1: ...e cleaning of each sensor one step at a time a to c and check after each step if this resolves the issue If it does not proceed to the next cleaning step a Wipe away dust with a soft microfiber cloth...

Page 2: ...Procedure Infrared IR Sensor Locate the small square sensor on the upper part of the bill track as shown below Ultraviolet UV Sensor Locate the 4 part UV sensors as shown below These pairs of sensors...

Page 3: ...2 rollers Note Several factors can cause a KCD 1000 to not recognize a genuine bill Overly wrinkled overly creased and overly worn bills Dropping the unit or bumping into the unit during use A harsh...