Koliber HOME&COOK KH-SM1045XX8-3 Instruction Manual & Warranty Download Page 7

7

English

Thank you for choosing our product. This appliance has been designed and manufactured to 

high standards of engineering and with proper use and care, as described in this leaflet, will 

give you years of useful service. Please read these instructions carefully.

IMPORTANT SAFETY ADVICE

1. 

Read instructions carefully before using this device and keep them for future reference.  

2. 

Do not operate in extreme heat (over 50°C) or cold conditions (under 5°C), avoid direct 
exposition to sunlight and dust.

3. 

This device is intended for household use only and not for commercial or industrial  use.  

4. 

Do not reach for any appliance that has fallen into water. Switch off the device and unplug 

immediately from the power outlet. 

5. 

Do not immerse electric parts in water or other liquids while cleaning. Never hold the 
appliance under running water.

6. 

While cleaning the device the water temperature should not exceed 50°C.

7. 

Do not remove the plug from the power outlet until the appliance has switched off.  

8. 

Do not twist, kink or wrap the cord around the appliance, as this may cause the insulation 
to  weaken and split.  

9. 

Do not remove the plug from the power outlet by pulling the cord, always grip the plug.  

10.  In case of damaged power supply cord and/or device body, further usage is strictly 

forbidden. In order to avoid danger, replacement must be performed by the manufacturer 

or its service department or similar qualified technicians. 

11.  Do not use outdoors.
12.  Before using, put this machine on a stable, even, skid proof and dry surface.
13.  Before using, make sure that all components are in place and correctly assembled. Only  then 

start using your device.

14.  Always disconnect the device from the power supply when it is left unattended and 

before  assembly, disassembly or cleaning.

15.  During operation, please do not leave the machine and never let children operate this 

machine.

16.  No-loaded (longer than 5 seconds) or overloaded work is strictly prohibited and may result 

in motor damage. 

WARNING: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, 
this appliance must not be supplied through an external switching device, such as a timer, 

or connected to a circuit that is regularly switched on and off by the utility.

17. 

After operation, do not remove food residuals before power supply has been cut off.

18. 

Switch  off  the  appliance  and  disconnect  from  supply  before  changing  accessories 

 

or approaching parts that move in use.

19.  Do not insert anything into the rotating hooks while the machine is working.
20.  This machine is unavailable for the weakness, unresponsive or psychopathic person 

(including children), unless under the direction or help from the person who have the 

responsibility for security. Children should be overseen, so it can be testified that they are 

not playing with it.

21.  This machine must not be used for others beyond regulated purposes according to this 

manual.

22.  The use of any accessory or equipment not recommended by the manufacturer  may result 

in fire, electrical shock, injury and damages and voids the warranty.  

23.  In the event of improper use or wrong operation, we do not accept any liability for resulting 

damages.

Summary of Contents for KH-SM1045XX8-3

















Reviews: