III: Connect the Loads
Plug in the loads to output receptacles on the rear panel of the UPS. Turn the power switch of UPS on, then
turn connected devices on all units connected to the UPS will be protected by the UPS.
IV: Connect LAN cable, Modem or Phone line for Surge Protection
Connect a single modem or phone line into the surge-protected “IN” jack on the back panel of the UPS.
Connect from “OUT” outlet to the phone or modem with another phone cable.
V: Connect USB Cable
To monitor the UPS status, such as unattended UPS shutdown and start-up, using bundled software, please
connect the UPS and PC with USB cable included.
Do not attach a power strip or surge suppressor to the UPS.
NEVER
connect a
laser printer
or
scanner
to the
UPS unit,
because in-rush current generated by
the
devices motor’s
may overload and damage the UPS
EN
