18
Remote Operations
Button
Function
This button powers the unit on or off.
MODE
This button allows you to cycle through the
following modes: Auto, Cool, Heat, Dry, and Fan.
This button decreases the set temperature, or the
time when the Timer is enabled.
This button increases the set temperature, or the
time when the Timer is enabled.
TIMER
This button is used to enable the timer. Press it
twice to cancel the programmed Auto Start/Start
time. See “Timer Feature” for operating details.
SPEED
This button allows you to cycle through the
following fan speeds: Auto, Low, Medium or
High.
ENERGY
SAVER
This button activates the Energy Saver feature.
Press it again to shut off the feature. See
“Energy Saver Feature” section for operating
details.
ONE
TOUCH
When this button is pressed the system will shift
to Cool mode and Auto fan speed. The set
temperature will automatically adjust to 80°F
(26°C.) Pressing will cancel timer settings.
SLEEP
This button is used to enable the Sleep feature.
This feature is available in Auto, Cool and Heat
modes. Press the button again to turn off the
Sleep feature. See “Sleep Feature” section for
operating details.
Warning
:
•
This product contains a lithium button/coin cell battery which is a potential Chemical Burn
Hazard. Keep away from children.
•
Always completely secure the battery compartment. If the battery compartment does not close
securely, stop using the product, remove the batteries, and keep away from children. If a new or
used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal
burns and can lead to death in as little as 2 hours. If you think batteries might have been
swallowed or placed inside any part of the body, seek immediate medical attention.
•
The cells should always be disposed of properly. Even used cells can cause injury.
