Koldfront WAC12002WCO, Owner'S Manual, Page: 16 / 25

11
To Operate in Auto Mode:

When you set the unit to “Auto” mode it will automatically select
cooling or fan only operation depending on the temperature
selected and the current room temperature.

Once the temperature you selected is achieved, the unit will
automatically maintain the room temperature.

In this mode the fan speed cannot be adjusted. It will start
automatically at a speed according to the actual room
temperature.
To Operate in Fan Only:

Use this function only when cooling is not desired, such as for
room circulation or to exhaust air (remember to open the vent).
You can choose any speed you prefer.

In this mode, the display will show the actual room temperature as
in the cooling mode.

In Fan Only mode, the temperature is not adjusted.
To Operate in Dry Mode:

In this mode, the air conditioner will operate as a dehumidifier.
Because the conditioned space is closed or sealed, some degree
of cooling will continue to occur.
To Use Energy Saver Feature:
To start the Energy Saver mode, press . This option is available on
“Cool”, “Dry”, and “Auto”. The fan will continue to run for 3 minutes after
the compressor shuts off. The fan then cycles on for 2 minutes at 10
minute intervals until the room temperature is above the set temperature
at which time the compressor turns back on and cooling starts.
To Use the Sleep Feature:
To initiate, press the Sleep button . In this mode the selected
temperature will increase by 2°F (1°C) 30 minutes after the mode is
selected. The temperature will then increase by another 2°F (1°C) after
an additional 30 minutes. This new temperature will be maintained for six
(6) hours before it returns to the originally selected temperature. This
ends the Sleep mode and the unit will continue to operate as originally
programmed. The Sleep Mode program can be cancelled at any time
during operation by again pressing the Sleep button.
To Use Timer (Auto Start/Stop) Feature:

When the unit is on or off, press the Timer button and the
“Timer On” indicator light illuminates. It indicates the Auto Start
program is initiated.

To turn the timer off, press the Timer button again and the
“Timer Off” indicator light illuminates. It indicates the Auto Stop
program is initiated.

Press or hold the Up or Down to change the Auto Time by
½ hour increments up to 10 hours; 1 hour increments thereafter
up to 24 hours. The control will count down the time remaining
until start.