15
Additional Tips:
General:
Fan Only Mode:
• Use this function only when cooling is not desired, such as for room circulation or to exhaust air (remember to
open the vent). You can choose any speed you prefer.
• In this mode, the display will show the actual room temperature.
• In Fan Only mode, the temperature is not adjustable.
Dry Mode:
• In this mode, the air conditioner will operate as a dehumidifier. Because the conditioned space is closed or
sealed, some degree of cooling will continue to occur.
• The fan speed is set to Low automatically.
• The “Cool” mode has an automatic three (3) minute timed delay start if the unit is turned off and on quickly. This
prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue to run during
this time.
• The air conditioner has a memory function. If a power outage occurs, the unit will restart in the previously
selected mode automatically when power resumes.
• The Energy Saver feature will automatically turn on in Cool, Dry, and Auto modes.
To Use the Timer (Auto Start/Stop) Feature:
Setting an Auto Start:
While the unit is off, press the Timer button ONCE. The timer on indicator will illuminate. You then have 3-5 seconds
to set the start time. Use the Up or Down buttons to change the time by 1/2 hour increments up to 10 hours or 1
hour increments up to 24 hours. The selected time will display for 5 seconds and then revert to the previous display.
Setting an Auto Stop:
While the unit is off, press the Timer button TWICE. The timer off indicator will illuminate. You then have 3-5 seconds
to set the stop time. Use the Up or Down buttons to change the time by 1/2 hour increments up to 10 hours or 1
hour increments up to 24 hours. The selected time will display for 5 seconds and then revert to the previous display.
Turning the unit on or off at any time, or adjusting the timer setting to 0.0 will cancel the timer program.
Digital Display:
• Displays the set temperature in °C or °F and the Auto-Timer settings. While operating in Fan Only mode, it shows
the current room temperature.
• To switch between °C and °F, press and hold the Up and Down Temp and Timer buttons at the same time for three
(3) seconds.