8
Consumer Service: 1.800.453.7673
www.kolcraft.com
To Attach Rear Wheels
1
Flip base over to expose underside. Locate rear wheel
opening in base of the walker.
2
Align holes of wheel with corresponding axle holes on the
base of the walker. Plastic tab may need to be pushed to
the side to expose the axle hole. The stem of the wheel
should be facing the inside of the base.
3
Slide metal axle into holes from the inside towards the
outside of the base until the head of the axle passes the
plastic tab and the tab is able to hold the axle in place.
Repeat for other wheel.
Tab
Attach Front Casters
1
Turn the base over and insert the stem of one of the front
casters into the hole in one of the front corners. Push
firmly until the caster snaps (locks) into place. Pull up on
caster to make sure it is locked in place.
CAUTION:
Be sure the caster is inserted fully into the
base. The top lip of the caster threads should be flush
with the base hole. Nothing below this lip should be
visible.
Top Lip of
Caster Threads
Correct
Assembly
Incorrect
Assembly