Step 1:
Undo 3 screws on
each side
End
Side
Mattress Support
Should be set to lowest position
A.
Undo the six screws attaching the
Side
to the
Ends
and remove the side.
B.
If it is not already, adjust the
Mattress Support
to its lowest position by loosening the
four screws on the support arms, moving them to the low position holes, and tightening all
four screws.
High Position
Middle Position
Low Position
Thread and tighten
all four screws
This product works with multiple cribs- illustrations may vary from your model
